Rubicon Global Teams with Georgia Tech to Create Waste Slinger Exoskeleton

 

According to the National Center for Biotechnology Information, a research sector of the National Institutes of Health, waste collection is one of the most hazardous jobs. Waste “slingers” are subjected to increased muscle and joint injuries because of the laborious nature of the job—jumping from the truck, grabbing and dumping cans and disposing of waste over and over again on a daily basis.

Because pushing, dragging and lifting thousands of bins and bags in a given day is extremely taxing, Atlanta-based Rubicon Global has partnered with Georgia Tech to utilize technology to give waste slingers some relief.

“We are looking to design wearable, assistive technology in the form of an exoskeleton that will aid slingers in their physically demanding job,” says Dr. Aaron Young, assistant professor of Automation / Mechatronics at Georgia Tech. “The idea of the exoskeleton is to improve safety, efficiency and workers’ capabilities to make their job easier and less strenuous.”

Rubicon and Georgia Tech have had a long affiliation, so the partnership is a natural fit.

“Georgia Tech is a premier research and technical institute, and we feel very fortunate that they also happen to be in our backyard,” says Phil Rodoni, chief technology officer for Rubicon Global. “We’ve enjoyed collaborating with them on a number of projects.”

Georgia Tech’s Institute of Robotics and Intelligent Machines (IRIM) is partnering with Rubicon to specifically focus on the science and engineering aspects of this project. Dr. Young’s EPIC (Exoskeleton and Prosthetic Intelligent Controls) lab will perform the initial biomechanical assessment.

Jun Ueda, a supporting PI at Georgia Tech who runs the Biorobotics and Human Modeling Lab, will perform a musculoskeletal analysis of the data to help better assess internal dynamics of the workers during their working tasks.

“Once we perform this assessment, the engineering groups at Georgia Tech plan to put together a novel wearable exoskeleton design to help augment the function of these workers and help them in their daily jobs,” says Dr. Young.

To launch this project, Georgia Tech is conducting a study to find data relative to the movement and strain of the slingers with the objective of finding ways to make the process safer and more efficient, says Rodoni.

“We are performing an initial research study to investigate the biomechanics of slingers during their daily activities,” says Dr. Young. “We will bring in Atlanta trash workers and formally study their biomechanics by replicating the actions they perform in the field.”

Georgia Tech will use motion capture technology, similar to what is seen in animation studios, to look at movement characteristics to assess what the workers’ muscles are doing through electromyography (EMG), a common technique to measure electrical energy in muscles used in many hospitals today.

In-depth biomechanics, including motion capture and EMG, have never been studied for slingers in the past, and this scientific assessment is needed to understand how to engineer the most effective assistive technology, according to Dr. Young.

Rubicon and Dr. Young’s team at Georgia Tech plan on creating the exoskeleton by using intelligent, wearable robotic technology that senses a user’s intent and provides assistive actions.

“We use artificial intelligence through machine learning techniques to allow an onboard computer to understand the intent of a human operator,” says Dr. Young. “This allows a wearable robot to act in sync with the human’s own muscles and provide assistive actions. We also have novel custom interface technology for wearable robotics made possible through the Prosthetics and Orthotics program at Georgia Tech.”

Georgia Tech’s labs partner closely with the clinical training program, and orthotists typically are involved in these projects to improve the comfort and fit of wearable exoskeleton technology. The institute also has a state-of-the-art human biomechanics lab to formally assess and refine robotic exoskeleton technology.

The study should be completed by the end of this year, according to Dr. Young, but it is too difficult to predict when the first prototype will be available.

“This is too difficult to predict at this time as there are many factors that affect this,” he says. “We are performing the initial biomechanics study of the slingers to understand how to most effectively intervene with wearable robotic technology. Until we have a better grasp of the specific solution, we can’t accurately predict timelines as the scope and difficulty of the future prototype is unknown until the initial assessment is complete.”

Click here for the full interview

Press Coverage

Rubicon Uses Technology to Solve Global Waste and Recycling Challenges

Rubicon is a technology company that powers a digital marketplace, provides a suite of SaaS products for waste, recycling, and smart city solutions, and collects and analyzes data for businesses and governments worldwide. Below is our recent interview with Renaud de Viel Castel , Senior… Keep Reading...

Rubicon’s Vice President of Smart Cities Named a Waste360 “40 Under 40” Award Winner

Congratulations to Rubicon’s Vice President of Smart Cities, Conor Riffle, for being honored by Waste360 as a 2020 “40 Under 40” award winner! The awards honor the next generation of leaders who are shaping the future of the waste and recycling industry. Always with an eye… Keep Reading...

RUBICONSmartCity Feature One of Government Fleet’s Most Popular Feature Stories in 2019

A Government Fleet story featuring RUBICONSmartCity was name one of the magazine’s most popular feature stories of 2019. The story, titled “In These Cities, Fleet Vehicles Are Roaming Data Centers,” highlighted Rubicon’s partnerships with the City of Montgomery, AL and West Memphis, AR. To quote the original article:… Keep Reading...

Press Releases

Speaker Series: Rubicon’s Conor Riffle to Lead Smart City Panel Discussion at Geotab Connect 2020

WHO: Conor Riffle, Vice President of Smart Cities, Rubicon (Twitter) WHAT: Improving transportation, lowering a carbon footprint, and creating safer streets and better road conditions. These are all aspects of a smart city. Moving from responding to citizen complaints to anticipating citizen needs is the… Keep Reading...

Rubicon Named a 2019 BUILD Magazine Awards Winner in Recycling and Waste Management

Atlanta, Georgia (January 6, 2020) — Rubicon announced today that the company has been named a 2019 BUILD Magazine Awards Winner in the category of Recycling and Waste Management. As the world’s population continues to increase, so too does the amount of refuse and the… Keep Reading...

Rubicon, Closed Loop Organics, and B Green Services Help Divert More Than One Ton of Waste Away from Landfills at “Afternoon in the Country” Event

Atlanta, Georgia (December 16, 2019) — Rubicon, a Certified B Corporation, today announced that it worked with Closed Loop Organics and B Green Services to divert more than a ton of waste away from landfills and into recycling streams at the one-day “Afternoon in the… Keep Reading...